What is the setting range of Mazak parameter SA67-SA73?

0 to 99999999 (unit: 0.01 kW). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA67-SA73

Rotational speed in the following spindle output diagrams: MACHINING NAVIGATION-RESULT/MACHINING NAVIGATION-PPEDICTION/Monitoring Functions/POSITION

Q: What does Mazak parameter SA67-SA73 do?

SA67-SA73 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational speed in the following spindle output diagrams:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION. Cross axis: speed Vertical axis: output Point Note : Whether to specify these values for an output diagram at short-time rating or at continuous rating depends on the specifications of the model.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Rotational speed in the following spindle output diagrams:  MACHINING NAVIGATION-RESULT  MACHINING NAVIGATION-PPEDICTION  Monitoring Functions  POSITION

Cross axis: speed Vertical axis: output Point Note : Whether to specify these values for an output diagram at short-time rating or at continuous rating depends on the specifications of the model.

Setting

Setting range0 to 99999999

Unit0.01 kW

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 86, 559. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →