What is the setting range of Mazak parameter SA93?

0 to 359 (unit: °). A changed value takes effect: After stop of movement.

PARAMMachine parameter · SPINDLE (SA)

SA93

Amount of synchronous tapping zero point shifting

Q: What does Mazak parameter SA93 do?

SA93 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of synchronous tapping zero point shifting. Set the amount of shifting from the Z-phase when the axis is to be returned to its zero point for synchronous tapping. Shifting is conducted in the Z-phase detection direction (specified in bit 4 of SA46).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the amount of shifting from the Z-phase when the axis is to be returned to its zero point for synchronous tapping. Shifting is conducted in the Z-phase detection direction (specified in bit 4 of SA46).

Setting

Setting range0 to 359

Unit°

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 87, 561. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →