What is the setting range of Mazak parameter SA94?

0 to 999999 (unit: min–1). A changed value takes effect: Immediate.

PARAMMachine parameter · SPINDLE (SA)

SA94

Homing speed for synchronous tapping

Q: What does Mazak parameter SA94 do?

SA94 is a Machine parameter in the SPINDLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Homing speed for synchronous tapping. Set the homing speed effective when “After return to zero point” (SA46 bit 2 = 0) is selected as the position-changing type for synchronous tapping.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the homing speed effective when “After return to zero point” (SA46 bit 2 = 0) is selected as the position-changing type for synchronous tapping.

Setting

Setting range0 to 999999

Unitmin–1

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 87, 561. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →