What is the setting range of Mazak parameter SD50?

0 to 2. A changed value takes effect: Immediate.

PARAMUser parameter · SOLID (SD)

SD50

Table type

Q: What does Mazak parameter SD50 do?

SD50 is a User parameter in the SOLID group of the MAZATROL SmoothX control (INTEGREX e-670H). Table type. Select a table type for 3D setup display. 0: Square table 1: Round table 2: Chuck * When this parameter is set to “2” on machines with the vertical Z-axis (L110 bit 7 = 1) and the rotary head axis (BA48 ≠ 0), the table will be displayed by referring to the settings of parameters BA1 to BA3. With other machines, the chuck shape will not be displayed even if this parameter is set to “2”.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Table type

Select a table type for 3D setup display. 0: Square table 1: Round table 2: Chuck * When this parameter is set to “2” on machines with the vertical Z-axis (L110 bit 7 = 1) and the rotary head axis (BA48 ≠ 0), the table will be displayed by referring to the settings of parameters BA1 to BA3. With other machines, the chuck shape will not be displayed even if this parameter is set to “2”.

Setting

Setting range0 to 2

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 370. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →