What is the setting range of Mazak parameter SU102?

0 to 65535 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU102

Return distance at wall during rough cutting in bar machining or in corner machining of EIA/ISO program

Q: What does Mazak parameter SU102 do?

SU102 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Return distance at walls during rough cutting in bar machining or in corner machining of an EIA/ISO program. Example : 1. Standard type cutting Prior to cutting up along the wall in the end of final cycle, escape will be made by specified distance. 2. High speed rough cutting Escape will be made by specified distance during return after reaching the wall. * For MAZATROL programs refer to TC67 and TC68.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Return distance at walls during rough cutting in bar machining or in corner machining of an EIA/ISO program

Example : 1. Standard type cutting Prior to cutting up along the wall in the end of final cycle, escape will be made by specified distance. 2. High speed rough cutting Escape will be made by specified distance during return after reaching the wall. * For MAZATROL programs refer to TC67 and TC68.

Setting

Setting range0 to 65535

Unit0.0001 mm/0.00001 in

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 297. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →