What is the setting range of Mazak parameter SU106?

0 to 65535 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU106

Minimum cut depth clamping value (radial value) in composite-type thread cutting cycle G276 of EIA/ISO program

Q: What does Mazak parameter SU106 do?

SU106 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Minimum cut depth clamping value (radial value) in composite-type thread cutting cycle G276 of EIA/ISO program. Clamping will follow the setting of if the calculated value of the cut depth with the composite type thread cutting cycle G276 is smaller than the setting of SU106. This parameter is valid only for the infeed operation of the fixed volume chip production scheme. * For MAZATROL programs refer to TC79.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Clamping will follow the setting of if the calculated value of the cut depth with the composite type thread cutting cycle G276 is smaller than the setting of SU106. This parameter is valid only for the infeed operation of the fixed volume chip production scheme. * For MAZATROL programs refer to TC79.

Setting

Setting range0 to 65535

Unit0.0001 mm/0.00001 in

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 298. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →