What is the setting range of Mazak parameter SU107?

0 to 999999 (unit: min–1). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU107

Safety clamp speed

Q: What does Mazak parameter SU107 do?

SU107 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Safety clamp speed. Set the spindle safety clamp speed of a tool whose diameter (nominal diameter) is not specified in the tool data. This clamp speed is invalid for the tools with tool diameter (or nominal diameter, if diameter cannot be specified) setting in the tool data.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Safety clamp speed

Set the spindle safety clamp speed of a tool whose diameter (nominal diameter) is not specified in the tool data. This clamp speed is invalid for the tools with tool diameter (or nominal diameter, if diameter cannot be specified) setting in the tool data.

Setting

Setting range0 to 999999

Unitmin–1

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 299. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →