What is the setting range of Mazak parameter SU108?

0 to 99999999 (unit: J). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU108

Safeguarding strength

Q: What does Mazak parameter SU108 do?

SU108 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Safeguarding strength. Set the machine safeguarding strength to be used during the calculation of the safety speed for the spindle. Remark : Spindle safety speed calculation expression 60 × 2E N = Tool diameter D (mm): ACT- in MAZATROL tool data (For a tool whose tool diameter cannot be registered in tool data: Nominal diameter) Safeguarding strength E (J): Parameter Tip mass m (kg): Parameter SU109/1000

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the machine safeguarding strength to be used during the calculation of the safety speed for the spindle. Remark : Spindle safety speed calculation expression 60 × 2E N = Tool diameter D (mm): ACT- in MAZATROL tool data (For a tool whose tool diameter cannot be registered in tool data: Nominal diameter) Safeguarding strength E (J): Parameter Tip mass m (kg): Parameter SU109/1000

Setting

Setting range0 to 99999999

UnitJ

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 299. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →