What is the setting range of Mazak parameter SU12?

0, 1, 2. A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU12

Rotating position specified in the indexing unit after tool change

Q: What does Mazak parameter SU12 do?

SU12 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotating position specified in the index unit after tool change. Select the rotating position specified in the index unit after tool change. 0: After the tool change, rotation occurs at the position specified in the index unit. For the movement from the completing position of the tool change to the rotating position of the index unit, three axes (X, Y, Z) move at the same time. 1: After the tool change, rotation occurs at the position specified in the index unit. For the movement from the completing position of the tool change to the rotating position of the index unit, the X-axis and the Y-axis move at the same time following completion of Z-axis movement. 2: After the tool change, rotation occurs at the completing position of the tool change.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Rotating position specified in the index unit after tool change

Select the rotating position specified in the index unit after tool change. 0: After the tool change, rotation occurs at the position specified in the index unit. For the movement from the completing position of the tool change to the rotating position of the index unit, three axes (X, Y, Z) move at the same time. 1: After the tool change, rotation occurs at the position specified in the index unit. For the movement from the completing position of the tool change to the rotating position of the index unit, the X-axis and the Y-axis move at the same time following completion of Z-axis movement. 2: After the tool change, rotation occurs at the completing position of the tool change.

Setting

Setting range0, 1, 2

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 46, 288. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →