What is the setting range of Mazak parameter SU124?

0 to 1799999 (unit: 0.0001°). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU124

Admissible motion range on the secondary rotational axis for workpiece placement error correction

Q: What does Mazak parameter SU124 do?

SU124 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Admissible motion range on the secondary rotational axis for workpiece placement error correction. Set the limit for the amount of motion on the secondary rotational axis for workpiece placement error correction. Note : Set zero (0) in if no restriction is to be imposed on the range of correcting motion on the secondary rotational axis for workpiece placement error correction.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the limit for the amount of motion on the secondary rotational axis for workpiece placement error correction. Note : Set zero (0) in if no restriction is to be imposed on the range of correcting motion on the secondary rotational axis for workpiece placement error correction.

Setting

Setting range0 to 1799999

Unit0.0001°

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 301. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →