What is the setting range of Mazak parameter SU126?

–1000 to 1000 (unit: 0.001 mm). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU126

Amount of offset for runout of the B-axis center (BA61) (only for Maza-Check)

Q: What does Mazak parameter SU126 do?

SU126 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Amount of offset for runout of the B-axis center (BA61). Amount of offset for runout of the B-axis center (BA61) * Set a minus value to perform offset in the same direction as BA61 when the B-axis rotational center position is located above the tool center position as shown in the figure. * Runout of B-axis center = BA61 + * This parameter can be altered by using system variable #6020. * This parameter is valid on the machines with the capability of Maza-Check.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Amount of offset for runout of the B-axis center (BA61)

Amount of offset for runout of the B-axis center (BA61) * Set a minus value to perform offset in the same direction as BA61 when the B-axis rotational center position is located above the tool center position as shown in the figure. * Runout of B-axis center = BA61 + * This parameter can be altered by using system variable #6020. * This parameter is valid on the machines with the capability of Maza-Check.

Setting

Setting range–1000 to 1000

Unit0.001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 301. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →