PARAMUser parameter · SYSTEM (SU)
SU128
Retraction position of the upper and lower turrets at the end of the two-workpiece machining sequence (X-axis)
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Retraction positions of the upper and lower turrets at the end of the two-workpiece machining sequence
Set the X- and Z-axis retraction positions of the upper and lower turret in the machine coordinate system. When parameter = 3, the upper and lower turrets are placed in a queue in this position after the two-workpiece machining sequence.
Setting
Setting range±99999999
Unit0.0001 mm/0.00001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 48, 302. Reference and explanation only — not a reproduction of the manual.