What is the setting range of Mazak parameter SU134?

0 to 200000 (unit: 1 mm/min / 0.1 in/min). A changed value takes effect: After stop of movement.

PARAMUser parameter · SYSTEM (SU)

SU134

Chopping clamp speed

Q: What does Mazak parameter SU134 do?

SU134 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Chopping clamp speed. The chopping axis feed rate is clamped with this parameter during chopping. When this parameter is set to 0, the feed rate will be clamped according to parameter M3.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The chopping axis feed rate is clamped with this parameter during chopping. When this parameter is set to 0, the feed rate will be clamped according to parameter M3.

Setting

Setting range0 to 200000

Unit1 mm/min / 0.1 in/min

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 48, 304. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →