SYSTEM bit settings (5 bits)

1. bit 3

   Tool command scheme for each turret

   When the group number is selected for tool command system, select either group number or tool number to use for each turret. 0: Group number 1: Tool number * When group number is used in the EIA/ISO program, bit 3 of parameter SU156, bit 4 of parameter F94, and bit 2 of parameter F84 must be set to 0. F94 (bit 4) 0 1 0 1 F84 (bit 2) 0 1 0 1 0 1 0 1 L51 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 EIA/ISO G T [Related parameters] F94 (bit 4) Tool command system (0: group number, 1: tool number) F84 (bit 2) Spare tool search (0: group number, 1: tool number) L51 Tool command system in MDI operation (0: tool number, 1: group number)

   Range 0, 1 · Takes effect: Immediate

2. bit 4

   Type of deep-hole drilling cycle G83/G87

   Type of deep-hole drilling cycle G83/G87 0: Normal type 1: High-speed type

   Range 0, 1 · Takes effect: Immediate

3. bit 5

   Fixed value (0)

4. bit 6

   Execution of the restarting search for a block in the mode of G68 when tool length compensation (G43/G44) remains valid with a turning tool mounted

   Execution of the restarting search for a block in the mode of G68 when tool length compensation (G43/G44) remains valid with a turning tool mounted. 0: Alarm 1: Possible (however, the return to the restarting position is not conducted)

   Range 0, 1 · Takes effect: Immediate

5. bit 7

   Execution of the restarting search for a block after the cancellation of the cross command

   Execution of the restarting search for a block after the cancellation of the cross command 0: Alarm 1: Possible (however, the return to the restarting position is not conducted)

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 49, 311, 312. Reference and explanation only — not a reproduction of the manual.