What is the setting range of Mazak parameter SU19?

0, 1. A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU19

Selecting the method of axis movement to the tool change command output position or to the position designated at RETURN of the end unit

Q: What does Mazak parameter SU19 do?

SU19 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Selecting the method of axis movement to the tool change command output position or to the position designated at RETURN of the end unit. SU19 = 0: Three axes (X, Y, Z) are simultaneously moved to the tool change command output position specified in SU10 and TC62 or to the position designated at RETURN of the end unit. * When the tool nose is present at a position internal to the position of (workpiece diameter + safety profile clearance), the axes pass through the clearance point. SU19 = 1: Following the X-axis, the Y- and Z-axes are simultaneously moved to the tool change command output position specified in SU10 and TC62 or to the position designated at RETURN of the end unit. * When the tool nose is present at a position internal to the position of (workpiece diameter + safety profile clearance), only the X-axis passes through the clearance point. The Z-axis does not pass. Note : This parameter is valid only when the program is of the workpiece scheme (WPC setting) or the Z-offset scheme.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

SU19 = 0: Three axes (X, Y, Z) are simultaneously moved to the tool change command output position specified in SU10 and TC62 or to the position designated at RETURN of the end unit. * When the tool nose is present at a position internal to the position of (workpiece diameter + safety profile clearance), the axes pass through the clearance point. SU19 = 1: Following the X-axis, the Y- and Z-axes are simultaneously moved to the tool change command output position specified in SU10 and TC62 or to the position designated at RETURN of the end unit. * When the tool nose is present at a position internal to the position of (workpiece diameter + safety profile clearance), only the X-axis passes through the clearance point. The Z-axis does not pass. Note : This parameter is valid only when the program is of the workpiece scheme (WPC setting) or the Z-offset scheme.

Setting

Setting range0, 1

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 46, 290. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →