What is the setting range of Mazak parameter SU29?

&0 to &7F. A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU29

Specification of an axis (linear axis) on a plane during polar coordinate interpolation

Q: What does Mazak parameter SU29 do?

SU29 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Specification of an axis (linear axis) on a plane during polar coordinate interpolation. Set the name of an axis (linear axis) on a plane used during polar coordinate interpolation by ASCII code (hexadecimal).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the name of an axis (linear axis) on a plane used during polar coordinate interpolation by ASCII code (hexadecimal).

Setting

Setting range&0 to &7F

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 293. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →