PARAMUser parameter · SYSTEM (SU)
SU51
Tool turning clearance in Z-axis
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Tool turning clearance (radial value) in X-axis
Tool turning clearance is required to prevent interference between the tool and stock material during tool change in automatic operation. Chuck Dmax: Stock material maximum outside diameter : Stock material edge projection length
Setting
Setting range0 to 65535
Unit0.001 mm/0.0001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 295. Reference and explanation only — not a reproduction of the manual.