What is the setting range of Mazak parameter SU54?

0 to 999 (unit: s). A changed value takes effect: Immediate.

PARAMUser parameter · SYSTEM (SU)

SU54

Allowable limit of axis movement completion waiting time when a cross machining command is executed

Q: What does Mazak parameter SU54 do?

SU54 is a User parameter in the SYSTEM group of the MAZATROL SmoothX control (INTEGREX e-670H). Allowable limit of axis movement completion waiting time when a cross machining command is executed. Sets the allowable limit of axis movement completion waiting time when a cross machining command is executed Alarm 159 CROSS MACHINING IMPOSSIBLE (0x0400) occurs if axis movement does not complete within the set allowable limit. F Command * The length of time required to end outputting droop when a moving axis stops. Note : 1. Execution of a cross-control command, if specified during axis movement, does not start until axis movement is completed. 2. If 0 is set, the waiting time is infinite. 3. If a value larger than 999 is set, it is regarded as 999. If a value smaller than 0 is set, it is regarded as 0.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the allowable limit of axis movement completion waiting time when a cross machining command is executed Alarm 159 CROSS MACHINING IMPOSSIBLE (0x0400) occurs if axis movement does not complete within the set allowable limit. F Command * The length of time required to end outputting droop when a moving axis stops. Note : 1. Execution of a cross-control command, if specified during axis movement, does not start until axis movement is completed. 2. If 0 is set, the waiting time is infinite. 3. If a value larger than 999 is set, it is regarded as 999. If a value smaller than 0 is set, it is regarded as 0.

Setting

Setting range0 to 999

Units

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 47, 296. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →