What is the setting range of Mazak parameter TAP1?

0 to 5. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · TAPE (TAP)

TAP1

Type of terminator

Q: What does Mazak parameter TAP1 do?

TAP1 is a Data I/O parameter in the TAPE group of the MAZATROL SmoothX control (INTEGREX e-670H). Type of terminator. Tape port selection Set values 1 RS232C EOB or EOR RS232C COM1 COM2 3 EOR only 4 One character of your choice COM3 5 conversion Two connector characters of your conversion choice connector COM4 Type of processing to be executed if the machining program of an existing work number is to be loaded Set values Description Issues an alarm if the received work Overrides the program if the received

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Type of terminator

Tape port selection Set values 1 RS232C EOB or EOR RS232C COM1 COM2 3 EOR only 4 One character of your choice COM3 5 conversion Two connector characters of your conversion choice connector COM4 Type of processing to be executed if the machining program of an existing work number is to be loaded Set values Description Issues an alarm if the received work Overrides the program if the received

Setting

Setting range0 to 5

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 96, 611, 612, 613. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →