What is the setting range of Mazak parameter TAP10?

0 to 255. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · TAPE (TAP)

TAP10

“]” code for paper tape reader/puncher for EIA

Q: What does Mazak parameter TAP10 do?

TAP10 is a Data I/O parameter in the TAPE group of the MAZATROL SmoothX control (INTEGREX e-670H). “]” code for paper tape reader/puncher for EIA. This parameter is used to set a hole-punching pattern for the character code “]” onto a paper tape reader/puncher using EIA. Set an eight-digit binary number in decimal form. E xample : 27)+(0 26)+(0 25)+(0 24)+(1 23)+(1 22)+(0 21)+(1 20)=13 (0 × × × × × × × ×

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used to set a hole-punching pattern for the character code “]” onto a paper tape reader/puncher using EIA. Set an eight-digit binary number in decimal form. E xample : 27)+(0 26)+(0 25)+(0 24)+(1 23)+(1 22)+(0 21)+(1 20)=13 (0 × × × × × × × ×

Setting

Setting range0 to 255

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 96, 615. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →