What is the setting range of Mazak parameter TAP4?

0, 1. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · TAPE (TAP)

TAP4

Output of CR during ISO code punching

Q: What does Mazak parameter TAP4 do?

TAP4 is a Data I/O parameter in the TAPE group of the MAZATROL SmoothX control (INTEGREX e-670H). Output of CR during ISO code punching. This parameter is used to specify whether or not CR is to be placed in front of LF (separation of blocks) during ISO code punching. 0: No placement of CR 1: Placement of CR

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used to specify whether or not CR is to be placed in front of LF (separation of blocks) during ISO code punching. 0: No placement of CR 1: Placement of CR

Setting

Setting range0, 1

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 96, 613. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →