What is the setting range of Mazak parameter TAP5?

0, 1. A changed value takes effect: At I/O startup.

PARAMData I/O parameter · TAPE (TAP)

TAP5

DC code parity

Q: What does Mazak parameter TAP5 do?

TAP5 is a Data I/O parameter in the TAPE group of the MAZATROL SmoothX control (INTEGREX e-670H). DC code parity. This parameter is used to specify whether or not a parity bit is to be assigned to the DC code to be output. Set values Parity Hole-punching pattern of DC3 code 0 No assignment 1 Assignment Note : This parameter is valid only when HAND SHAKE is set to DC CONTROL.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

DC code parity

This parameter is used to specify whether or not a parity bit is to be assigned to the DC code to be output. Set values Parity Hole-punching pattern of DC3 code 0 No assignment 1 Assignment Note : This parameter is valid only when HAND SHAKE is set to DC CONTROL.

Setting

Setting range0, 1

Unit—

Program typeM, E

Takes effectAt I/O startup

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 96, 614. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →