PARAMUser parameter · TURNING (TC)
TC1
Cut depth reduction rate for rough cutting in bar machining unit, corner machining unit, and copy machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Cut depth reduction rate for rough cutting in bar machining unit, corner machining unit, and copy machining unit
Cut depth can be reduced as remaining workpiece thickness becomes less in rough cutting in bar machining unit, corner machining unit, and copy machining unit. Reduced cut depth (A) can be expressed by A = T × where T = Remaining thickness (radial value).
Setting
Setting range0 to 100
Unit%
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 317. Reference and explanation only — not a reproduction of the manual.