What is the setting range of Mazak parameter TC104?

–32768 to 32767 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC104

Clearance for rechucking using the workpiece transfer unit

Q: What does Mazak parameter TC104 do?

TC104 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Clearance for rechucking using the workpiece transfer unit. Set the clearance for rechucking the workpiece using the workpiece transfer unit. Movement to the clearance position occurs in the G0 mode. Movement from the clearance position to the gripping position occurs in the G1 mode using the feed rate specified in parameter TC57.  Spindle No. 1 specification  Spindle No. 2 specification

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the clearance for rechucking the workpiece using the workpiece transfer unit. Movement to the clearance position occurs in the G0 mode. Movement from the clearance position to the gripping position occurs in the G1 mode using the feed rate specified in parameter TC57.  Spindle No. 1 specification  Spindle No. 2 specification

Setting

Setting range–32768 to 32767

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 53, 346. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →