‹ALARMSMazatrol Assistant
PARAMUser parameter · TURNING (TC)
TC106

Designation of MOVE C in a workpiece transfer unit of a program of workpiece scheme (only for the INTEGREX e-H Series)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does

Designation of MOVE C in a workpiece transfer unit of a program of workpiece scheme

Select whether or not to enable the specification of MOVE C which becomes valid after the workpiece has been moved using the workpiece transfer unit (CHUCK/BAR/MOVE) in a program of workpiece scheme. 0: Not to be enabled 1: To be enabled MOVE C can be specified only when the workpiece transfer unit is set as follows: [CHUCK WORK] or [BAR LOOP] is selected for PAT. Either [3 ORIENT], [4 C-AXIS POSITION], or [5 KEEP POSITION] is selected for SPDL. Also, MOVE C needs to be specified in incremental data terms with respect to the value of C in the immediately preceding fundamental coordinate unit (WPC). (Only for the INTEGREX e-H Series)

Setting
Setting range0, 1
Unit—
Program typeM
Takes effectImmediate
Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 53, 346. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →