What is the setting range of Mazak parameter TC107?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC107

Overshoot in the longitudinal direction with the workpiece for inside machining

Q: What does Mazak parameter TC107 do?

TC107 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Overshoot in the longitudinal direction with the workpiece for inside machining. Set the distance beyond the workpiece where the end point in the workpiece longitudinal direction can be placed when machining the inner surface in bar machining, copy machining or thread cutting unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the distance beyond the workpiece where the end point in the workpiece longitudinal direction can be placed when machining the inner surface in bar machining, copy machining or thread cutting unit.

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 53, 347. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →