PARAMUser parameter · TURNING (TC)
TC108
End position of the two-workpiece machining
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
End position of the two-workpiece machining
Select the waiting position after the two-workpiece machining. Tool-rotating position in accordance with the spindle and the basic coordinate system selected for machining after the two-workpiece machining Tool-rotating position in accordance with the spindle and the basic coordinate system selected for the two-workpiece machining End position of the machining (safety clearance position) = 3 Retraction position specified by the two-workpiece machining unit (END)
Setting
Setting range0 to 3
Unit—
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 53, 347. Reference and explanation only — not a reproduction of the manual.