What is the setting range of Mazak parameter TC120-TC137?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: At power on.

PARAMUser parameter · TURNING (TC)

TC120-TC137

Distance to the front end of the long boring bar Distance center Shift stroke Z Long boring bar

Q: What does Mazak parameter TC120-TC137 do?

TC120-TC137 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Distance to the front end of the long boring bar Distance center Shift stroke Z Long boring bar. Specify the distance from the B-axis rotational center of the milling spindle to the front end of the long boring bar. (On the 3D MONITOR display, long boring bar image is shown at the display position when the tool data is changed or the tool is changed to other tool after changing the parameter value.) from B-axis rotational to the spindle edge (BA62) B-axis rotational center Address Description Long boring bar No. 1 - Shift stroke X Long boring bar No. 1 - Shift stroke Y Long boring bar No. 1 - Shift stroke Z Long boring bar No. 2 - Shift stroke X Long boring bar No. 2 - Shift stroke Y Long boring bar No. 2 - Shift stroke Z Long boring bar No. 3 - Shift stroke X Long boring bar No. 3 - Shift stroke Y Long boring bar No. 3 - Shift stroke Z Long boring bar No. 4 - Shift stroke X Long boring bar No. 4 - Shift stroke Y Long boring bar No. 4 - Shift stroke Z Long boring bar No. 5 - Shift stroke X Long boring bar No. 5 - Shift stroke Y Long boring bar No. 5 - Shift stroke Z Long boring bar No. 6 - Shift stroke X Long boring bar No. 6 - Shift stroke Y Long boring bar No. 6 - Shift stroke Z

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the distance from the B-axis rotational center of the milling spindle to the front end of the long boring bar. (On the 3D MONITOR display, long boring bar image is shown at the display position when the tool data is changed or the tool is changed to other tool after changing the parameter value.) from B-axis rotational to the spindle edge (BA62) B-axis rotational center Address Description Long boring bar No. 1 - Shift stroke X Long boring bar No. 1 - Shift stroke Y Long boring bar No. 1 - Shift stroke Z Long boring bar No. 2 - Shift stroke X Long boring bar No. 2 - Shift stroke Y Long boring bar No. 2 - Shift stroke Z Long boring bar No. 3 - Shift stroke X Long boring bar No. 3 - Shift stroke Y Long boring bar No. 3 - Shift stroke Z Long boring bar No. 4 - Shift stroke X Long boring bar No. 4 - Shift stroke Y Long boring bar No. 4 - Shift stroke Z Long boring bar No. 5 - Shift stroke X Long boring bar No. 5 - Shift stroke Y Long boring bar No. 5 - Shift stroke Z Long boring bar No. 6 - Shift stroke X Long boring bar No. 6 - Shift stroke Y Long boring bar No. 6 - Shift stroke Z

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 349. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →