PARAMUser parameter · TURNING (TC)
TC13
Deceleration rate at rough cutting start in bar machining unit and copy machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Deceleration rate at rough cutting start in bar machining unit and copy machining unit
F’ = F × F: Specified feed rate F': Feed rate at cutting start (TC15)
Setting
Setting range0 to 100
Unit%
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 320. Reference and explanation only — not a reproduction of the manual.