‹ALARMSMazatrol Assistant
PARAMUser parameter · TURNING (TC)
TC144

TURNING bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — TC144 is set bit by bit
  1. bit 0

    Automatic selection of the relief path for the continuous I.D. machining

    Takes effect: After stop of movement

  2. bit 1

    Workpiece transfer axis motion for opposed turret specification lathes

    Takes effect: After stop of movement

  3. bit 2

    C-axis clamping during workpiece transfer with C-axis positioning, valid/invalid

    Takes effect: After stop of movement

  4. bit 3

    Automatic output of spindle rotation command when turning tool is used in the manual program unit

    Takes effect: After stop of movement

  5. bit 4

    ATC and RETURN of the end unit after single-process operation

    Takes effect: After stop of movement

  6. bit 5

    ATC and RETURN of the end unit for repetition (CONTI. = 1)

    Takes effect: After stop of movement

  7. bit 6

    Relief path G00/G01 selection for edging

    Takes effect: After stop of movement

  8. bit 7

    Handling when no tools are specified for the manual program unit

    Takes effect: After stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 54, 354. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →