‹ALARMSMazatrol Assistant
PARAMUser parameter · TURNING (TC)
TC145

TURNING bit settings (7 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — TC145 is set bit by bit
  1. bit 0

    OFFSET unit Z-axial inversion during turning

    Takes effect: Immediate

  2. bit 1

    Handling of the G04 command in the manual program unit

    Takes effect: Immediate

  3. bit 2

    Operation by cutting-feed override 0 in G31 command mode

    Takes effect: Immediate

  4. bit 3

    Mode selection after C-axis transfer using the workpiece transfer unit

    Takes effect: Immediate

  5. bit 4

    Selection of a calculation method for tail barrier end reference

    Takes effect: Immediate

  6. bit 5

    Output of maximum spindle speed command specified in the common unit

    Takes effect: Immediate

  7. bit 7

    Operation of the path inversed with respect to the traveling direction of the tip (only for copy machining)

    Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 54, 55, 355. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →