PARAMUser parameter · TURNING (TC)
TC15
Deceleration clearance at start of rough cutting in bar machining unit and copy machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Deceleration clearance at start of rough cutting in bar machining unit and copy machining unit
Note : Using this parameter will reduce load in the initial contact between the tool and workpiece. (TC13)
Setting
Setting range0 to 65535
Unit0.001 mm/0.0001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 321. Reference and explanation only — not a reproduction of the manual.