What does Mazak parameter TC150 do?

TC150 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). 4 bit settings.

Which bits does Mazak parameter TC150 have?

Bit 0: Setting of the thrust when moving a workpiece Bit 1: Pinch cut/Y-axis turning in MAZATROL program Bit 2: Alarm stop if a program that performs 2 workpiece machining with only one spindle is executed Bit 5: Selection of surface speed to be output to the screen during constant surface speed control

‹ALARMSMazatrol Assistant

PARAMUser parameter · TURNING (TC)

TC150

TURNING bit settings (4 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — TC150 is set bit by bit

bit 0
Setting of the thrust when moving a workpiece
0: Invalid 1: Valid
Range 0, 1 · Takes effect: Immediate
bit 1
Pinch cut/Y-axis turning in MAZATROL program
0: Invalid 1: Valid * This parameter is valid only when the pinch cut/Y-axis turning option is selected.
Range 0, 1 · Takes effect: Immediate
bit 2
Alarm stop if a program that performs 2 workpiece machining with only one spindle is executed
When a program that performs 2 workpiece machining is executed with only one spindle, 0: No alarm stop 1: Stop with the output of alarm 789 DBL SPDL OPER UNIT ERROR
Range 0, 1
bit 5
Selection of surface speed to be output to the screen during constant surface speed control
0: Display the specified surface speed 1: Display the surface speed calculated from the spindle speed Note : When bit 5 = 1, the surface speed display will fluctuate.
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 55, 56, 362, 363. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →