What does Mazak parameter TC151 do?

TC151 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). 1 bit settings.

Which bits does Mazak parameter TC151 have?

Bit 0: Approach method for ID cutting

PARAMUser parameter · TURNING (TC)

TC151

TURNING bit settings (1 bit)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — TC151 is set bit by bit

bit 0
Approach method for ID cutting
Selects whether or not to pass the clearance point during the approach for ID cutting when the tool tip is closer to the center of workpiece rotation than the inside diameter clearance and at a point outside the front (back) clearance. 0 : Do not go through 1 : Go through
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 363. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →