PARAMUser parameter · TURNING (TC)
TC155
Cut depth per cycle for machining external diameter in bar machining unit
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Cut depth per cycle for machining external diameter in bar machining unit
Set the depth of cut in the Z-axis direction when machining pattern #2 is selected in the external diameter turning unit.
Setting
Setting range0 to 65535
Unit0.001 mm/0.0001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 364. Reference and explanation only — not a reproduction of the manual.