What is the setting range of Mazak parameter TC158?

0 to 200 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC158

Feed rate override in reciprocating grooving operation

Q: What does Mazak parameter TC158 do?

TC158 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Feed rate override in reciprocating grooving operation. Sets the override for the traverse feed rate in reciprocating grooving operation. Setting “0” results in the same operation as when “100” is set.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the override for the traverse feed rate in reciprocating grooving operation. Setting “0” results in the same operation as when “100” is set.

Setting

Setting range0 to 200

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 365. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →