What is the setting range of Mazak parameter TC159?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC159

Tool load avoidance distance in reciprocating grooving operation (bottom)

Q: What does Mazak parameter TC159 do?

TC159 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool load avoidance distance in reciprocating grooving operation (bottom). Sets the distance to avoid excess load on a tool at the bottom in reciprocating grooving operation. [Related parameters] Sets the retraction distance from the wall at completion of groove bottom machining in reciprocating grooving operation.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the distance to avoid excess load on a tool at the bottom in reciprocating grooving operation. [Related parameters] Sets the retraction distance from the wall at completion of groove bottom machining in reciprocating grooving operation.

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 365. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →