PARAMUser parameter · TURNING (TC)
TC19
Turning-drilling cut depth calculation coefficient
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Turning-drilling cut depth calculation coefficient
Used for automatic determination of first cut depth in turning-drilling d = D × 1 100 D : Drilling hole diameter d : Cut depth of first cut 1
Setting
Setting range0 to 1000
Unit%
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 322. Reference and explanation only — not a reproduction of the manual.