What is the setting range of Mazak parameter TC2?

0 to 500 (unit: %). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC2

Acceleration rate in up-going taper for rough cutting in bar machining unit

Q: What does Mazak parameter TC2 do?

TC2 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Acceleration rate in up-going taper for rough cutting in bar machining unit. F : Feed rate for rough cutting F = F × × F : Increased feed rate 2 1 100 a 2 This is effective only when (bit 0) = 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

F : Feed rate for rough cutting F = F × × F : Increased feed rate 2 1 100 a 2 This is effective only when (bit 0) = 1.

Setting

Setting range0 to 500

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 317. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →