What does Mazak parameter TC25 do?

TC25 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Thread height calculation coefficient for outside diameter, face/rear thread cutting (inch). h = P × h : Thread height P : Thread pitch

What is the setting range of Mazak parameter TC25?

0 to 65535 (unit: 0.01%). A changed value takes effect: Immediate.

‹ALARMSMazatrol Assistant

PARAMUser parameter · TURNING (TC)

TC25

Thread height calculation coefficient for outside diameter, face/rear thread cutting (inch)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

h = P × h : Thread height P : Thread pitch

Setting

Setting range0 to 65535

Unit0.01%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 324. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →