What does Mazak parameter TC289 do?

TC289 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). 1 bit settings.

Which bits does Mazak parameter TC289 have?

Bit 0: Considering C1 and C2 values in the workpiece travel unit in an FRM workpiece scheme program in the tool path check, trace shapes and QUICK shapes

‹ALARMSMazatrol Assistant

PARAMUser parameter · TURNING (TC)

TC289

TURNING bit settings (1 bit)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — TC289 is set bit by bit

bit 0
Considering C1 and C2 values in the workpiece travel unit in an FRM workpiece scheme program in the tool path check, trace shapes and QUICK shapes
0: Not considering C1/C2 1: Considering C1/C2
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 367. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →