What does Mazak parameter TC290 do?

TC290 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). 2 bit settings.

Which bits does Mazak parameter TC290 have?

Bit 0: Thread cutting pattern Bit 1: Cutting start position selection for reciprocating/uni-directional grooving

PARAMUser parameter · TURNING (TC)

TC290

TURNING bit settings (2 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — TC290 is set bit by bit

bit 0
Thread cutting pattern
0: Corrected flank infeed 1: Flank infeed (bit 0) Angle < 0 Angle = 0 Angle > 0
Range 0, 1 · Takes effect: Immediate
bit 1
Cutting start position selection for reciprocating/uni-directional grooving

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 56, 368. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →