PARAMUser parameter · TURNING (TC)
TC38
Safety contour clearance — Inside diameter clearance (radial value)
Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does
Safety contour clearance ― Outside diameter clearance (radial value)
Safety contour clearance is provided for outside of the stock material shape specified by common data in program. Tool approach and escape paths for each unit will be automatically determined according to set data (outside diameter, inside diameter, front clearance, back clearance) for parameters from TC37 to TC40. TC40 TC39 Dmax: Stock material maximum outside diameter Dmin: Stock material minimum inside diameter : Stock material edge projection length
Setting
Setting range0 to 65535
Unit0.001 mm/0.0001 in
Program typeM
Takes effectImmediate
Source
Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 327. Reference and explanation only — not a reproduction of the manual.