What is the setting range of Mazak parameter TC39?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC39

Safety contour clearance — Front clearance

Q: What does Mazak parameter TC39 do?

TC39 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Safety contour clearance ― Outside diameter clearance (radial value). Safety contour clearance is provided for outside of the stock material shape specified by common data in program. Tool approach and escape paths for each unit will be automatically determined according to set data (outside diameter, inside diameter, front clearance, back clearance) for parameters from TC37 to TC40. TC40  TC39 Dmax: Stock material maximum outside diameter Dmin: Stock material minimum inside diameter : Stock material edge projection length

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Safety contour clearance ― Outside diameter clearance (radial value)

Safety contour clearance is provided for outside of the stock material shape specified by common data in program. Tool approach and escape paths for each unit will be automatically determined according to set data (outside diameter, inside diameter, front clearance, back clearance) for parameters from TC37 to TC40. TC40  TC39 Dmax: Stock material maximum outside diameter Dmin: Stock material minimum inside diameter : Stock material edge projection length

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 327. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →