What is the setting range of Mazak parameter TC4?

0 to 2. A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC4

Selection of chamfering pattern in rough external turning cycle G71 (G271) or rough edge-machining cycle G72 (G272)

Q: What does Mazak parameter TC4 do?

TC4 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of chamfering pattern in rough external turning cycle G71 (G271) or rough edge-machining cycle G72 (G272). TC4 = 0: 45° TC4 = 1: Chamfering along the shape to be finished TC4 = 2: Feed rate (F) for chamfering is expressed as follows: (where F0 = Feed rate specified in program) When TC4 = 2, feed rate can be changed only when chamfering at 90°. (TC3)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

TC4 = 0: 45° TC4 = 1: Chamfering along the shape to be finished TC4 = 2: Feed rate (F) for chamfering is expressed as follows: (where F0 = Feed rate specified in program) When TC4 = 2, feed rate can be changed only when chamfering at 90°. (TC3)

Setting

Setting range0 to 2

Unit—

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 50, 317. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →