What is the setting range of Mazak parameter TC44?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC44

Workpiece transfer clearance

Q: What does Mazak parameter TC44 do?

TC44 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Workpiece transfer clearance. Workpiece transfer clearance is provided to specify workpiece transfer position in workpiece transfer unit. No. 1 No. 2 spindle spindle Workpiece transfer position NM211-00231 No. 2 spindle traverses by rapid feed rate to a position distant from transfer position by clearance distance, and then transfer operation is initiated. (TC57, TC58, TC59)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Workpiece transfer clearance is provided to specify workpiece transfer position in workpiece transfer unit. No. 1 No. 2 spindle spindle Workpiece transfer position NM211-00231 No. 2 spindle traverses by rapid feed rate to a position distant from transfer position by clearance distance, and then transfer operation is initiated. (TC57, TC58, TC59)

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 330. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →