What is the setting range of Mazak parameter TC46?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC46

Drilling depth decrement in turning-drilling unit

Q: What does Mazak parameter TC46 do?

TC46 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Drilling depth decrement in turning-drilling unit. Cut depth d1 d2 n-th cycle i-th cycle 1st cycle di b dn 1 2 i n Number of D : Drilling depth d1 : Cut depth in 1st cycle di : Cut depth in i-th cycle d1 – TC46 × (i – 1) (di  b) b : Drilling depth clamping value (TC48) (TC48)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Cut depth d1 d2 n-th cycle i-th cycle 1st cycle di b dn 1 2 i n Number of D : Drilling depth d1 : Cut depth in 1st cycle di : Cut depth in i-th cycle d1 – TC46 × (i – 1) (di  b) b : Drilling depth clamping value (TC48) (TC48)

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 330. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →