What does Mazak parameter TC48 do?

TC48 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Drilling cut depth clamp value in turning-drilling unit. Minimum turning-drilling cut depth is set. (TC46)

What is the setting range of Mazak parameter TC48?

0 to 65535 (unit: 0.001 mm/0.0001 in). A changed value takes effect: Immediate.

‹ALARMSMazatrol Assistant

PARAMUser parameter · TURNING (TC)

TC48

Drilling cut depth clamp value in turning-drilling unit

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Minimum turning-drilling cut depth is set. (TC46)

Setting

Setting range0 to 65535

Unit0.001 mm/0.0001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 331. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →