What is the setting range of Mazak parameter TC51?

0 to 255 (unit: Revolutions). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC51

Dwell at the hole bottom during non-through hole drilling cycle of the turning-drilling unit

Q: What does Mazak parameter TC51 do?

TC51 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Dwell at the hole bottom during non-through hole drilling cycle of the turning-drilling unit. Set the number of revolutions of the spindle during dwell time at the bottom of a hole when the #0 - #4 non-through hole drilling cycle is selected in the turning-drilling unit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the number of revolutions of the spindle during dwell time at the bottom of a hole when the #0 - #4 non-through hole drilling cycle is selected in the turning-drilling unit.

Setting

Setting range0 to 255

UnitRevolutions

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 332. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →