What is the setting range of Mazak parameter TC52?

0 to 255 (unit: Revolutions). A changed value takes effect: Immediate.

PARAMUser parameter · TURNING (TC)

TC52

Dwell (specification of spindle rotation number) at groove bottom in groove cutting unit

Q: What does Mazak parameter TC52 do?

TC52 is a User parameter in the TURNING group of the MAZATROL SmoothX control (INTEGREX e-670H). Dwell (specification of spindle rotation number) at groove bottom in groove cutting unit. Tool will stop at groove bottom while spindle rotates N times when TC52 is set to N (N=0 to 255). the spindle rotates N times. NM211-00218

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Tool will stop at groove bottom while spindle rotates N times when TC52 is set to N (N=0 to 255). the spindle rotates N times. NM211-00218

Setting

Setting range0 to 255

UnitRevolutions

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 51, 332. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →